Bogert Aviation
      3606 North Swallow Avenue
      Pasco, WA  99301
      (800) 627-8088
 Info@bogert-av.com

 

Battery Box Modification

Fully FAA/PMA Approved  STC SA4008NM

Original vs. Bogert’s
Cable & Nylon Flange

After Modification
Positive Side Shown

 
-
Improve Starting Performance.
-Easier Removal & Installation of Battery.
-May prolong life of battery and starter.
-Less expensive to modify existing box than to replace.
-Compatible with our famous “Low Loss” Cable Kits!
-Eliminate extra connection on outside of the battery box.
-Do away with the troublesome braided negative strap
.
 

Prices differ slightly depending on situation. Look at the choices below. If in doubt, call us.

 

I only need Battery Box Mod. -- I either already have Bogert's Low Loss Cables or I am ordering the Low Loss cables from the Cable Kit page at the same time.
Order P/N 08M-BBM

Battery Box Mod 
P/N 08M-BBM $59.00 ea.  

I only need the Battery Box Mod and the Positive and Negative cables coming out of the box that are required to complete the Batter Box Modification.
Order P/N 08M-SET*

P/N 08M-SET $94.00 ea.  

 *most planes are $94.00.   A few models will be more. Call.

 

Note: Flanges sold separately accommodate experimental aircraft not requiring an STC. They are also suitable as replacement parts for aircraft already modified under STC SA4008NM.  Please call if you have questions.
 

“U” Shaped Nylon Flange Only P/N 08M-Flange

 $   15.00 ea.

 
 

Using a Concord Battery?

Aircraft using Concord CB-35A and RG-35A batteries must install two PN 1-1-6 adapter plates to the battery posts before completing the Battery Box Modification. These adapter plates raise the battery post height to equal the post height of standard G-35 series batteries.

 

Concord Battery Adapter Plates P/N 01-1-6

 $   49.00 Pair.

 

 

 

| Home | Products | Support | History | Press Release | Contact |